Wheelchair lift platform
The so-called wheelchair lift platform, is mainly composed of a track and a lifting bedplate, that is similar to a simple small elevator. The rail is embedded in the channel entranceon the wall that with the slope of the stairs down the rail is to the internal. The lifting platform can be folded against the wall when it is not in used, hence it can not occupy the channel entrance space. Rides wheelchair’s disabled when in use, the wheelchair on four wheels can be fixed on the bedplate, press the switch can control the lifting platform to enter theunderground passage, it is safe and convenient.
|
Platform size |
1200mm(L) x 1200mm(W) |
|
|
Max Platform Height |
6000mm |
|
|
Speed |
60mm/s |
|
|
Load capacity |
150KG~350KG |
|
|
Operate voltage |
24V |
|
|
Power Output |
2.2KW |
|
|
Power Input |
220V/50HZ (or customized for local power supply) |
|
|
Drive System |
Hydraulic |
|
|
Control Mode |
Inching Switch or Automatic |
|
|
Drive Control |
Self-resetting system |
|
|
Overload |
Protection Over current relay |
|
|
Material of Platform |
Checkered slip-proof aluminum alloy |
|
|
Painting |
Plastic electrostatic spraying |
|
|
Working Condition |
Both indoors and outdoors |
|
|
Working temperature |
From -10°~60°C |
|
|
Installation
|
Non-pit installation, directly fixed to concrete floor (the concrete floor below the platform shall not be lower than the ground) |
|
|
Control Device
|
Calling box (installed on the wall nearby) and remote controller(Extra optional) |
|
|
Emergency Stop
|
The lifting and lowering process can be stopped immediately by pressing the emergency button. |
|
|
Safety device |
Safety Interlock |
Lock the platform when it is out of control |
|
|
Emergency lowering |
The platform can be lowered by opening hydraulic valve manually or rolling screw rod. |